
Hydraulic Lift, Trailed Type, Offset GOBLE DISC HARROW
Hydraulic Lift, Trailed Type, Offset GOBLE DISC HARROW
Trailing type offset disc harrows with hydraulic lift, are machines used to cleaning up plant residues (corn, sunflower, wheat etc.) and weed; and to break duff layer.
It prepares the field directly for planting after the harvest by harrowless cultivating without using any other agricultural machine in dry seasons where ploughs can not enter to the field and it may also be used for cultivation of extremely wet soil.
It prevents wind and water erosion while ploughing the stubble due to the movement with hydraulic system and having multidirectional movement capacity. It provides the wheel to move on field level by the axle mechanism on the wheel and thereby working depth may be adjusted efficiently.
- Raw materials that are used prepared for production after all audits and tests have been made and quality materials are used
- It is a machine whose usage and settings are very easy by means of its design.
- It can be produced as two types of chassis as normal and big upon request.
- A: Arrow setting is made by the holes on drawing arrow that are out of the center and prevents tractor to exert more power.
- B: Parallelism adjusting arm to ground adjusts parallesim of front and back battaries to ground according to soil type.
- C: You can easily cultivate your land by means of guide plate without loosing time and without dugging groove hole. There are scraping knives on all of our discs to clean the soil sticks during working.
- D: There are double seals and double bearings on our beds and oil draining hole to see that oils which are fulled to beds are drained.
- E: 6.00 x 16, 7,50 x 16, 10,75 x 15,3, 11,5/80 x 15,3 tyres can be put on our machines as suitable to their chassis.
- F: 610 and 660 mm diameter European or local production discs as flat or with notch can be mounted to our machines upon request.
- There are stoppers to fill oil or water to chassis on our machines. Thus, machine becomes heavy by loading oil or water and enable machines to work on hard soil conditions.
MODELS | GT-GD20 | GT-GD22 | GT-GD24 | GT-GD26 | GT-GD28 | GT-GD30 | GT-GD32 | GT-GD34 | GT-GD36 | |
---|---|---|---|---|---|---|---|---|---|---|
Number of Discs | 20 | 22 | 24 | 26 | 28 | 30 | 32 | 34 | 36 | Adet |
Disc Diameter | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | 560 x 4,5 | mm |
Between Disc | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | 22 | cm |
Number of Bearings | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 12 | Adet |
Working Width | 220 | 242 | 264 | 286 | 308 | 330 | 352 | 374 | 396 | cm |
Total Width | 244 | 266 | 288 | 310 | 332 | 354 | 376 | 398 | 420 | cm |
Total Length | 520 | 520 | 527 | 527 | 527 | 527 | 562 | 562 | 562 | cm |
Total Height | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | 125 | cm |
Chassis Size | 100x200x6 | 100x200x6 | 100x200x6 | 100x200x6 | 100x200x6 | 100x200x6 | 100x200x8 | 100x200x8 | 100x200x8 | cm |
Weight 560 mm Disc | 1700 | 1750 | 1800 | 1860 | 1930 | 2010 | 2130 | 2280 | 2420 | kg |
Weight 610 mm Disc | 1750 | 1800 | 1900 | 2000 | 2100 | 2200 | 2300 | 2450 | 1560 | kg |
Weight 660 mm Disc | 1800 | 1850 | 2000 | 2100 | 2200 | 2300 | 2470 | 2600 | 2700 | kg |
Min. Engine Power | 80-90 | 90-100 | 100-110 | 110-120 | 120-130 | 130-140 | 140-150 | 150-160 | 160-170 | hp |